Equipment Features

VLUCAN 1325 has a processing area of 1300x2500mm and is an open model that maximizes convenience and saves equipment installation space.

The high-rigidity main frame structure guarantees strong durability and minimizes vibration during high-speed machining.
The lifetime of the laser oscillator is almost semi-permanent at 100,000 hours, and it has a structure that does not require a separate constant temperature and humidity room, enabling efficient use.
It is possible to cut highly reflective, high-difficulty materials that were impossible with existing Co2 equipment.
(Aluminum, copper-based, silver, etc.) Compared to existing Co2 equipment, it can operate with only about 30% of the power consumption based on the same power, and with a beam transport structure that does not require a mirror, there is no maintenance and the cost of consumables is drastically reduced, resulting in dramatic productivity. Increased effect can be expected.

• 
  Application of high rigidity frame
  
  Vibration was minimized by applying a high-rigidity main frame, and distortion was prevented through a heat treatment process at 1100 degrees for 20 hours.
  
• 
  Excellent cutting performance
  
  It boasts superior cutting performance and cutting speed compared to existing CO2 lasers. In addition, the fiber laser has a lifespan of 100,000 hours, so maintenance costs are very low.
  
• 
  Highly reflective metal processing possible
  
  The patented Fiber Laser technology fundamentally blocks the reflected light reflected from metal so that the laser generating device is not damaged, and materials that cannot be processed with conventional lasers, such as copper, aluminum, gold, silver, and brass, can be processed without damaging the equipment. do
  
• 
  Applicable to various laser oscillators
  
  Various laser oscillators can be applied with the desired configuration depending on the purpose of work, material characteristics, laser output, and manufacturer.
  

Option

• 
  Linear Motor System selectable
  
  Basically, Servo+Rack&Pinion System is applied
  Linear Motor System can be selected and applied as an option
  When applying the linear system, there is no wear on the driving part and more precise machining is possible.
  
• 
  Head for fiber laser, can be selected
  
  The laser head must be applied according to the purpose of work, the characteristics of the material, and the laser power.
  Dedicated laser head is an important part, so it will be decided through consultation.
  

Material Processing Sample

• 
  metal
• 
  non-ferrous metal